click on picture to zoom
share this product link

General Specification:

• Shell : Consisting of ‘U’ trough of suitable dimensions. Construction of  S.S and side plates duly M.S stiffened from outside and from inside with S.S.
• Mixing Mechanism : Paddle type blades welded to the main shaft provide for efficient mixing of thick heavy material. PTFE gland mechanism provided at shaft ends prevents ingress of external powder into the trough and prevents leakage.
• Charging : From the top charging can be done through hingeable lid, Hopper or Nozzle can be provided for additional spraying of additives.
• Discharge : By bottom discharge slide Iris or Butterfly valve of suitable diameter, for regulated discharge.
• Drive : Consisting of suitable HP TEFC 3 phase ac 415v / 50 cycles motor  coupled to suitable worm gear, with driving shafts mounted on suitable plummer block.
• Mounting : Mounted on suitable ISMC Section Stand, with protective covers for belts and couplings.
• MOC : All contact parts in S.S construction. Complete unit with S.S. cover and all surfaces polished to mirror dull finish. MS parts dull painted to smooth finish.  
• Options Available :  The control panel is mounted on platform and is provided with                                                                                                             1. Unit with FLP          2.  Unit in S.S 316         3. GMP Model with M.S parts cladded with S.S                                         

Technical Specification: